1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465146614671468146914701471147214731474147514761477147814791480148114821483148414851486148714881489149014911492149314941495149614971498149915001501150215031504150515061507150815091510151115121513151415151516151715181519152015211522152315241525152615271528152915301531153215331534153515361537153815391540154115421543154415451546154715481549155015511552155315541555155615571558155915601561156215631564156515661567156815691570157115721573157415751576157715781579158015811582158315841585158615871588158915901591159215931594159515961597159815991600160116021603160416051606160716081609161016111612161316141615161616171618161916201621162216231624162516261627162816291630163116321633163416351636163716381639164016411642164316441645164616471648164916501651165216531654165516561657165816591660166116621663166416651666166716681669167016711672167316741675167616771678167916801681168216831684168516861687168816891690169116921693169416951696169716981699170017011702170317041705170617071708170917101711171217131714171517161717171817191720172117221723172417251726172717281729173017311732173317341735173617371738173917401741174217431744174517461747174817491750175117521753175417551756175717581759176017611762176317641765176617671768176917701771177217731774177517761777177817791780178117821783178417851786178717881789179017911792179317941795179617971798179918001801180218031804180518061807180818091810181118121813181418151816181718181819182018211822182318241825182618271828182918301831183218331834183518361837183818391840184118421843184418451846184718481849185018511852185318541855185618571858185918601861186218631864186518661867186818691870187118721873187418751876187718781879188018811882188318841885188618871888188918901891189218931894189518961897189818991900190119021903190419051906190719081909191019111912191319141915191619171918191919201921192219231924192519261927192819291930193119321933193419351936193719381939194019411942194319441945194619471948194919501951195219531954195519561957195819591960196119621963196419651966196719681969197019711972197319741975197619771978197919801981198219831984198519861987198819891990199119921993199419951996199719981999200020012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050205120522053205420552056205720582059206020612062206320642065206620672068206920702071207220732074207520762077207820792080208120822083208420852086208720882089209020912092209320942095209620972098209921002101210221032104210521062107210821092110211121122113211421152116211721182119212021212122212321242125212621272128212921302131 |
- # Simplified Chinese translation for opcode.
- # Copyright (C) 2005 Free Software Foundation, Inc.
- # This file is distributed under the same license as the binutils package.
- # Meng Jie <zuxyhere@eastday.com>, 2005.
- # Mingye Wang <arthur200126@gmail.com>, 2015.
- # Boyuan Yang <073plan@gmail.com>, 2017, 2018.
- #
- msgid ""
- msgstr ""
- "Project-Id-Version: opcodes 2.30.0\n"
- "Report-Msgid-Bugs-To: bug-binutils@gnu.org\n"
- "POT-Creation-Date: 2018-01-13 13:44+0000\n"
- "PO-Revision-Date: 2018-05-15 21:17+0800\n"
- "Last-Translator: Boyuan Yang <073plan@gmail.com>\n"
- "Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
- "Language: zh_CN\n"
- "MIME-Version: 1.0\n"
- "Content-Type: text/plain; charset=UTF-8\n"
- "Content-Transfer-Encoding: 8bit\n"
- "Plural-Forms: nplurals=1; plural=0;\n"
- "X-Bugs: Report translation errors to the Language-Team address.\n"
- "X-Generator: Poedit 2.0.7\n"
- #. Invalid option.
- #: aarch64-dis.c:81 arc-dis.c:781 arm-dis.c:6155
- #, c-format
- msgid "Unrecognised disassembler option: %s\n"
- msgstr "无法识别的反汇编器选项:%s\n"
- #: aarch64-dis.c:3264
- #, c-format
- msgid ""
- "\n"
- "The following AARCH64 specific disassembler options are supported for use\n"
- "with the -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
- #: aarch64-dis.c:3268
- #, c-format
- msgid ""
- "\n"
- " no-aliases Don't print instruction aliases.\n"
- msgstr ""
- "\n"
- " no-aliases 不要打印指令别名。\n"
- #: aarch64-dis.c:3271
- #, c-format
- msgid ""
- "\n"
- " aliases Do print instruction aliases.\n"
- msgstr ""
- "\n"
- " aliases 要打印指令别名。\n"
- #: aarch64-dis.c:3275
- #, c-format
- msgid ""
- "\n"
- " debug_dump Temp switch for debug trace.\n"
- msgstr ""
- "\n"
- " debug_dump 调试跟踪的临时开关。\n"
- #: aarch64-dis.c:3279 mips-dis.c:2601 mips-dis.c:2609 mips-dis.c:2611
- #: riscv-dis.c:509
- #, c-format
- msgid "\n"
- msgstr "\n"
- #: aarch64-opc.c:1311
- msgid "immediate value"
- msgstr "立即数"
- #: aarch64-opc.c:1321
- msgid "immediate offset"
- msgstr "立即数偏移"
- #: aarch64-opc.c:1331
- msgid "register number"
- msgstr "寄存器数"
- #: aarch64-opc.c:1341
- msgid "register element index"
- msgstr "寄存器元素下标"
- #: aarch64-opc.c:1351
- msgid "shift amount"
- msgstr "移位操作数"
- #: aarch64-opc.c:1363
- msgid "multiplier"
- msgstr ""
- #: aarch64-opc.c:1436
- msgid "reg pair must start from even reg"
- msgstr ""
- #: aarch64-opc.c:1442
- msgid "reg pair must be contiguous"
- msgstr ""
- #: aarch64-opc.c:1456
- msgid "extraneous register"
- msgstr "多余寄存器"
- #: aarch64-opc.c:1462
- msgid "missing register"
- msgstr "缺失寄存器"
- #: aarch64-opc.c:1473
- msgid "stack pointer register expected"
- msgstr "预期的堆栈指针寄存器"
- #: aarch64-opc.c:1496
- msgid "z0-z15 expected"
- msgstr "预期为 z0-z15"
- #: aarch64-opc.c:1497
- msgid "z0-z7 expected"
- msgstr "预期为 z0-z7"
- #: aarch64-opc.c:1523
- #, fuzzy
- #| msgid "Bad register name"
- msgid "invalid register list"
- msgstr "%q+D的寄存器名无效"
- #: aarch64-opc.c:1537
- msgid "p0-p7 expected"
- msgstr "预期为 p0-p7"
- #: aarch64-opc.c:1563 aarch64-opc.c:1571
- msgid "unexpected address writeback"
- msgstr "意外的地址写回"
- #: aarch64-opc.c:1582
- msgid "address writeback expected"
- msgstr "预期的地址写回"
- #: aarch64-opc.c:1629
- msgid "negative or unaligned offset expected"
- msgstr "预期的负或未对齐的偏移量"
- #: aarch64-opc.c:1656
- msgid "invalid register offset"
- msgstr "无效的寄存器偏移量"
- #: aarch64-opc.c:1678
- #, fuzzy
- msgid "invalid post-increment amount"
- msgstr "类型没有后自增运算符"
- #: aarch64-opc.c:1694 aarch64-opc.c:2171
- msgid "invalid shift amount"
- msgstr "无效的移位操作数"
- #: aarch64-opc.c:1707
- #, fuzzy
- #| msgid "invalid conditional option"
- msgid "invalid extend/shift operator"
- msgstr "无效的移位操作符"
- #: aarch64-opc.c:1753 aarch64-opc.c:1992 aarch64-opc.c:2027 aarch64-opc.c:2046
- #: aarch64-opc.c:2054 aarch64-opc.c:2125 aarch64-opc.c:2301 aarch64-opc.c:2401
- #: aarch64-opc.c:2414
- msgid "immediate out of range"
- msgstr "立即数越界"
- #: aarch64-opc.c:1775 aarch64-opc.c:1817 aarch64-opc.c:1866 aarch64-opc.c:1900
- msgid "invalid addressing mode"
- msgstr "无效寻址模式"
- #: aarch64-opc.c:1858
- #, fuzzy
- msgid "index register xzr is not allowed"
- msgstr "寄存器元素下标"
- #: aarch64-opc.c:1980 aarch64-opc.c:2002 aarch64-opc.c:2204 aarch64-opc.c:2212
- #: aarch64-opc.c:2278 aarch64-opc.c:2307
- msgid "invalid shift operator"
- msgstr "无效的移位操作符"
- #: aarch64-opc.c:1986
- msgid "shift amount must be 0 or 12"
- msgstr "移位量必须为 0 或 12"
- #: aarch64-opc.c:2009
- msgid "shift amount must be a multiple of 16"
- msgstr "移位量必须是 16 的倍数"
- #: aarch64-opc.c:2021
- msgid "negative immediate value not allowed"
- msgstr "不允许负立即数"
- #: aarch64-opc.c:2136
- #, fuzzy
- msgid "immediate zero expected"
- msgstr "预期的浮点常量立即数"
- #: aarch64-opc.c:2150
- #, fuzzy
- #| msgid "shift amount expected to be 0 or 12"
- msgid "rotate expected to be 0, 90, 180 or 270"
- msgstr "移位量预计为 0 或 12"
- #: aarch64-opc.c:2160
- #, fuzzy
- #| msgid "shift amount expected to be 0 or 12"
- msgid "rotate expected to be 90 or 270"
- msgstr "移位量预计为 0 或 12"
- #: aarch64-opc.c:2220
- #, fuzzy
- msgid "shift is not permitted"
- msgstr "指针不能用作 case 常量"
- #: aarch64-opc.c:2245
- msgid "invalid value for immediate"
- msgstr "无效的立即数的值"
- #: aarch64-opc.c:2270
- msgid "shift amount must be 0 or 16"
- msgstr "移位量必须为 0 或 16"
- #: aarch64-opc.c:2291
- msgid "floating-point immediate expected"
- msgstr "预期的浮点常量立即数"
- #: aarch64-opc.c:2325
- msgid "no shift amount allowed for 8-bit constants"
- msgstr ""
- #: aarch64-opc.c:2335
- msgid "shift amount must be 0 or 8"
- msgstr "移位量必须为 0 或 8"
- #: aarch64-opc.c:2348
- msgid "immediate too big for element size"
- msgstr ""
- #: aarch64-opc.c:2355
- msgid "invalid arithmetic immediate"
- msgstr "无效的算术立即数"
- #: aarch64-opc.c:2369
- msgid "floating-point value must be 0.5 or 1.0"
- msgstr "浮点值必须为 0.5 或 1.0"
- #: aarch64-opc.c:2379
- msgid "floating-point value must be 0.5 or 2.0"
- msgstr "浮点值必须为 0.5 或 2.0"
- #: aarch64-opc.c:2389
- msgid "floating-point value must be 0.0 or 1.0"
- msgstr "浮点值必须为 0.0 或 1.0"
- #: aarch64-opc.c:2420
- #, fuzzy
- #| msgid "invalid mask field"
- msgid "invalid replicated MOV immediate"
- msgstr "不允许负立即数"
- #: aarch64-opc.c:2535
- #, fuzzy
- msgid "extend operator expected"
- msgstr "需要%<operator%>"
- #: aarch64-opc.c:2548
- #, fuzzy
- msgid "missing extend operator"
- msgstr "扩展%s 失败"
- #: aarch64-opc.c:2554
- msgid "'LSL' operator not allowed"
- msgstr "不允许 'LSL' 操作符"
- #: aarch64-opc.c:2575
- msgid "W register expected"
- msgstr "预期的 W 寄存器"
- #: aarch64-opc.c:2586
- msgid "shift operator expected"
- msgstr "预期的移位操作符"
- #: aarch64-opc.c:2593
- msgid "'ROR' operator not allowed"
- msgstr "不允许 'ROR' 操作符"
- #: alpha-opc.c:154
- msgid "branch operand unaligned"
- msgstr "分支操作数未对齐"
- #: alpha-opc.c:170 alpha-opc.c:186
- msgid "jump hint unaligned"
- msgstr "跳转提示未对齐"
- #: arc-dis.c:377
- msgid ""
- "\n"
- "Warning: disassembly may be wrong due to guessed opcode class choice.\n"
- "Use -M<class[,class]> to select the correct opcode class(es).\n"
- "\t\t\t\t"
- msgstr ""
- #: arc-dis.c:823
- #, c-format
- msgid "Unrecognised disassembler CPU option: %s\n"
- msgstr "无法识别的反汇编器 CPU 选项:%s\n"
- #: arc-dis.c:1385
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| "The following AARCH64 specific disassembler options are supported for use\n"
- #| "with the -M switch (multiple options should be separated by commas):\n"
- msgid ""
- "\n"
- "The following ARC specific disassembler options are supported for use \n"
- "with -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "下列 AARCH64 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
- #: arc-dis.c:1397
- #, c-format
- msgid " dsp Recognize DSP instructions.\n"
- msgstr " dsp 识别 DSP 指令。\n"
- #: arc-dis.c:1399
- #, c-format
- msgid " spfp Recognize FPX SP instructions.\n"
- msgstr " spfp 识别 FPX SP 指令。\n"
- #: arc-dis.c:1401
- #, c-format
- msgid " dpfp Recognize FPX DP instructions.\n"
- msgstr " dpfp 识别 FPX DP 指令。\n"
- #: arc-dis.c:1403
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " msa Recognize MSA instructions.\n"
- msgid " quarkse_em Recognize FPU QuarkSE-EM instructions.\n"
- msgstr ""
- "\n"
- " msa 识别 MSA 指令。\n"
- #: arc-dis.c:1405
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " msa Recognize MSA instructions.\n"
- msgid " fpuda Recognize double assist FPU instructions.\n"
- msgstr ""
- "\n"
- " msa 识别 MSA 指令。\n"
- #: arc-dis.c:1407
- #, c-format
- msgid " fpus Recognize single precision FPU instructions.\n"
- msgstr " fpus 识别单精度 FPU 指令。\n"
- #: arc-dis.c:1409
- #, c-format
- msgid " fpud Recognize double precision FPU instructions.\n"
- msgstr " fpud 识别双精度 FPU 指令。\n"
- #: arc-dis.c:1411
- #, c-format
- msgid " hex Use only hexadecimal number to print immediates.\n"
- msgstr ""
- #: arc-opc.c:41 arc-opc.c:64 arc-opc.c:90
- msgid "LP_COUNT register cannot be used as destination register"
- msgstr ""
- #: arc-opc.c:88
- msgid "cannot use odd number destination register"
- msgstr ""
- #: arc-opc.c:101
- msgid "cannot use odd number source register"
- msgstr ""
- #: arc-opc.c:114
- msgid "operand is not zero"
- msgstr "操作数不是 0"
- #: arc-opc.c:173
- #, fuzzy
- msgid "register R30 is a limm indicator"
- msgstr "立即数不能是寄存器"
- #: arc-opc.c:175
- #, fuzzy
- #| msgid "immediate out of range"
- msgid "register out of range"
- msgstr "立即数越界"
- #: arc-opc.c:194
- msgid "register must be R0"
- msgstr "寄存器必须是 R0"
- #: arc-opc.c:212
- msgid "register must be R1"
- msgstr "寄存器必须是 R1"
- #: arc-opc.c:229
- msgid "register must be R2"
- msgstr "寄存器必须是 R2"
- #: arc-opc.c:246
- msgid "register must be R3"
- msgstr "寄存器必须是 R3"
- #: arc-opc.c:263
- msgid "register must be SP"
- msgstr "寄存器必须是 SP"
- #: arc-opc.c:280
- msgid "register must be GP"
- msgstr "寄存器必须是 GP"
- #: arc-opc.c:297
- msgid "register must be PCL"
- msgstr "寄存器必须是 PCL"
- #: arc-opc.c:314
- msgid "register must be BLINK"
- msgstr "寄存器必须是 BLINK"
- #: arc-opc.c:331
- msgid "register must be ILINK1"
- msgstr "寄存器必须是 ILINK1"
- #: arc-opc.c:348
- msgid "register must be ILINK2"
- msgstr "寄存器必须是 ILINK2"
- #. ARC NPS400 Support: See comment near head of file.
- #: arc-opc.c:379 arc-opc.c:417 arc-opc.c:455 arc-opc.c:720
- msgid "register must be either r0-r3 or r12-r15"
- msgstr "寄存器必须是 r0-r3 或 r12-r15"
- #: arc-opc.c:506
- msgid "accepted values are from -1 to 6"
- msgstr "可接受的值在 -1 到 6 之间"
- #: arc-opc.c:535
- #, fuzzy
- #| msgid "Bad register name"
- msgid "first register of the range should be r13"
- msgstr "%q+D的寄存器名无效"
- #: arc-opc.c:537
- msgid "last register of the range doesn't fit"
- msgstr ""
- #: arc-opc.c:557 arc-opc.c:572
- msgid "invalid register number, should be fp"
- msgstr "无效的寄存器数,应当为 fp"
- #: arc-opc.c:594
- msgid "invalid register number, should be blink"
- msgstr "无效的寄存器数,应当为 blink"
- #: arc-opc.c:616
- msgid "invalid register number, should be pcl"
- msgstr "无效的寄存器数,应当为 pcl"
- #: arc-opc.c:768
- msgid "invalid size, should be 1, 2, 4, or 8"
- msgstr "无效的大小,应当为 1、2、4 或 8"
- #: arc-opc.c:813
- msgid "invalid immediate, must be 1, 2, or 4"
- msgstr "无效的立即数,应当为 1、2 或 4"
- #: arc-opc.c:852
- #, fuzzy
- #| msgid "invalid mask field"
- msgid "invalid value for CMEM ld/st immediate"
- msgstr "不允许负立即数"
- #: arc-opc.c:879
- msgid "invalid position, should be 0, 16, 32, 48 or 64."
- msgstr "无效的位置,应当为 0、16、32、48 或 64。"
- #: arc-opc.c:913
- msgid "invalid position, should be 16, 32, 64 or 128."
- msgstr "无效的位置,应当为 16、32、64 或 128。"
- #: arc-opc.c:935
- #, fuzzy
- #| msgid "immediate value out of range"
- msgid "invalid size value must be on range 1-64."
- msgstr "立即数越界"
- #: arc-opc.c:966
- #, fuzzy
- #| msgid "Invalid position, should be 0, 8, 16, or 24"
- msgid "invalid position, should be 0, 8, 16, or 24"
- msgstr "无效的位置,应当为 0、8、16 或 24"
- #: arc-opc.c:991
- msgid "invalid size, value must be "
- msgstr "无效的大小,值必须为 "
- #: arc-opc.c:1065
- msgid "value out of range 1 - 256"
- msgstr "值越界 1 - 256"
- #: arc-opc.c:1074
- msgid "value must be power of 2"
- msgstr "值必须是 2 的倍数"
- #: arc-opc.c:1127
- msgid "value must be in the range 0 to 28"
- msgstr "值必须在 0 到 28 的范围中"
- #: arc-opc.c:1149
- msgid "value must be in the range 1 to "
- msgstr "值的范围必须在 1 到 "
- #: arc-opc.c:1179
- msgid "value must be in the range 0 to 240"
- msgstr "值必须在 0 到 240 的范围中"
- #: arc-opc.c:1181
- msgid "value must be a multiple of 16"
- msgstr "值必须是 16 的倍数"
- #: arc-opc.c:1201
- #, fuzzy
- msgid "invalid address type for operand"
- msgstr "无效寻址模式"
- #: arc-opc.c:1235
- msgid "value must be in the range 0 to 31"
- msgstr "值必须在 0 到 31 的范围中"
- #: arc-opc.c:1260
- msgid "invalid position, should be one of: 0,4,8,...124."
- msgstr "无效的位置,应当为 0、4、8、...、124。"
- #: arm-dis.c:3229
- msgid "Select raw register names"
- msgstr "选择原始寄存器名称"
- #: arm-dis.c:3231
- msgid "Select register names used by GCC"
- msgstr "选择 GCC 使用的寄存器名称"
- #: arm-dis.c:3233
- msgid "Select register names used in ARM's ISA documentation"
- msgstr "选择 ARM 的 ISA 文档中使用的寄存器名称"
- #: arm-dis.c:3235
- msgid "Assume all insns are Thumb insns"
- msgstr ""
- #: arm-dis.c:3236
- msgid "Examine preceding label to determine an insn's type"
- msgstr ""
- #: arm-dis.c:3237
- #, fuzzy
- #| msgid "register number must be even"
- msgid "Select register names used in the APCS"
- msgstr "立即数不能是寄存器"
- #: arm-dis.c:3239
- #, fuzzy
- #| msgid "register number must be even"
- msgid "Select register names used in the ATPCS"
- msgstr "立即数不能是寄存器"
- #: arm-dis.c:3241
- msgid "Select special register names used in the ATPCS"
- msgstr "选择 ATPCS 中使用的特殊寄存器名称"
- #: arm-dis.c:3639
- msgid "<illegal precision>"
- msgstr "<非法的精度>"
- #: arm-dis.c:6148
- #, c-format
- msgid "Unrecognised register name set: %s\n"
- msgstr "无法识别的寄存器名称集:%s\n"
- #: arm-dis.c:6852
- #, c-format
- msgid ""
- "\n"
- "The following ARM specific disassembler options are supported for use with\n"
- "the -M switch:\n"
- msgstr ""
- "\n"
- "下列 ARM 特定的反汇编器选项可通过 -M 开关启用:\n"
- #: avr-dis.c:115 avr-dis.c:136
- #, c-format
- msgid "undefined"
- msgstr "未定义"
- #: avr-dis.c:215
- #, c-format
- msgid "Internal disassembler error"
- msgstr "反汇编器内部错误"
- #: avr-dis.c:268
- #, c-format
- msgid "unknown constraint `%c'"
- msgstr "未知的约束‘%c’"
- #: cgen-asm.c:351 epiphany-ibld.c:201 fr30-ibld.c:201 frv-ibld.c:201
- #: ip2k-ibld.c:201 iq2000-ibld.c:201 lm32-ibld.c:201 m32c-ibld.c:201
- #: m32r-ibld.c:201 mep-ibld.c:201 mt-ibld.c:201 or1k-ibld.c:201
- #: xc16x-ibld.c:201 xstormy16-ibld.c:201
- #, c-format
- msgid "operand out of range (%ld not between %ld and %ld)"
- msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"
- #: cgen-asm.c:373
- #, c-format
- msgid "operand out of range (%lu not between %lu and %lu)"
- msgstr "操作数越界(%lu 不在 %lu 和 %lu 之间)"
- #: d30v-dis.c:254
- #, c-format
- msgid "<unknown register %d>"
- msgstr "<未知的寄存器 %d>"
- #. Can't happen.
- #: dis-buf.c:61
- #, c-format
- msgid "Unknown error %d\n"
- msgstr "未知错误 %d\n"
- #: dis-buf.c:70
- #, c-format
- msgid "Address 0x%s is out of bounds.\n"
- msgstr "地址 0x%s 越界。\n"
- #: epiphany-asm.c:68
- #, fuzzy
- #| msgid "unrecognized form of instruction"
- msgid "register unavailable for short instructions"
- msgstr "启用对短加载指令的使用"
- #: epiphany-asm.c:115
- #, fuzzy
- #| msgid "register number must be even"
- msgid "register name used as immediate value"
- msgstr "立即数不能是寄存器"
- #. Don't treat "mov ip,ip" as a move-immediate.
- #: epiphany-asm.c:178 epiphany-asm.c:234
- #, fuzzy
- msgid "register source in immediate move"
- msgstr "立即数不能是寄存器"
- #: epiphany-asm.c:187
- msgid "byte relocation unsupported"
- msgstr "不支持字节重定位"
- #. -- assembler routines inserted here.
- #. -- asm.c
- #: epiphany-asm.c:193 frv-asm.c:972 iq2000-asm.c:56 lm32-asm.c:95
- #: lm32-asm.c:127 lm32-asm.c:157 lm32-asm.c:187 lm32-asm.c:217 lm32-asm.c:247
- #: m32c-asm.c:140 m32c-asm.c:235 m32c-asm.c:276 m32c-asm.c:334 m32c-asm.c:355
- #: m32r-asm.c:53 mep-asm.c:241 mep-asm.c:259 mep-asm.c:274 mep-asm.c:289
- #: mep-asm.c:301 or1k-asm.c:54
- msgid "missing `)'"
- msgstr "缺少‘)’"
- #: epiphany-asm.c:270
- msgid "ABORT: unknown operand"
- msgstr "中止:未知的操作数"
- #: epiphany-asm.c:296
- #, fuzzy
- msgid "Not a pc-relative address."
- msgstr "生成相对 pc 的代码"
- #: epiphany-asm.c:455 fr30-asm.c:310 frv-asm.c:1263 ip2k-asm.c:511
- #: iq2000-asm.c:459 lm32-asm.c:349 m32c-asm.c:1584 m32r-asm.c:328
- #: mep-asm.c:1287 mt-asm.c:595 or1k-asm.c:503 xc16x-asm.c:376
- #: xstormy16-asm.c:276
- #, fuzzy, c-format
- msgid "Unrecognized field %d while parsing.\n"
- msgstr "打印 insn 时遇到无法识别的字段 %d。\n"
- #: epiphany-asm.c:506 fr30-asm.c:361 frv-asm.c:1314 ip2k-asm.c:562
- #: iq2000-asm.c:510 lm32-asm.c:400 m32c-asm.c:1635 m32r-asm.c:379
- #: mep-asm.c:1338 mt-asm.c:646 or1k-asm.c:554 xc16x-asm.c:427
- #: xstormy16-asm.c:327
- msgid "missing mnemonic in syntax string"
- msgstr "语法字符串中没有助记符"
- #. We couldn't parse it.
- #: epiphany-asm.c:641 epiphany-asm.c:645 epiphany-asm.c:734 epiphany-asm.c:841
- #: fr30-asm.c:496 fr30-asm.c:500 fr30-asm.c:589 fr30-asm.c:696 frv-asm.c:1449
- #: frv-asm.c:1453 frv-asm.c:1542 frv-asm.c:1649 ip2k-asm.c:697 ip2k-asm.c:701
- #: ip2k-asm.c:790 ip2k-asm.c:897 iq2000-asm.c:645 iq2000-asm.c:649
- #: iq2000-asm.c:738 iq2000-asm.c:845 lm32-asm.c:535 lm32-asm.c:539
- #: lm32-asm.c:628 lm32-asm.c:735 m32c-asm.c:1770 m32c-asm.c:1774
- #: m32c-asm.c:1863 m32c-asm.c:1970 m32r-asm.c:514 m32r-asm.c:518
- #: m32r-asm.c:607 m32r-asm.c:714 mep-asm.c:1473 mep-asm.c:1477 mep-asm.c:1566
- #: mep-asm.c:1673 mt-asm.c:781 mt-asm.c:785 mt-asm.c:874 mt-asm.c:981
- #: or1k-asm.c:689 or1k-asm.c:693 or1k-asm.c:782 or1k-asm.c:889 xc16x-asm.c:562
- #: xc16x-asm.c:566 xc16x-asm.c:655 xc16x-asm.c:762 xstormy16-asm.c:462
- #: xstormy16-asm.c:466 xstormy16-asm.c:555 xstormy16-asm.c:662
- msgid "unrecognized instruction"
- msgstr "无法识别的指令"
- #: epiphany-asm.c:688 fr30-asm.c:543 frv-asm.c:1496 ip2k-asm.c:744
- #: iq2000-asm.c:692 lm32-asm.c:582 m32c-asm.c:1817 m32r-asm.c:561
- #: mep-asm.c:1520 mt-asm.c:828 or1k-asm.c:736 xc16x-asm.c:609
- #: xstormy16-asm.c:509
- #, c-format
- msgid "syntax error (expected char `%c', found `%c')"
- msgstr "语法错误(需要字符‘%c’,得到‘%c’)"
- #: epiphany-asm.c:698 fr30-asm.c:553 frv-asm.c:1506 ip2k-asm.c:754
- #: iq2000-asm.c:702 lm32-asm.c:592 m32c-asm.c:1827 m32r-asm.c:571
- #: mep-asm.c:1530 mt-asm.c:838 or1k-asm.c:746 xc16x-asm.c:619
- #: xstormy16-asm.c:519
- #, c-format
- msgid "syntax error (expected char `%c', found end of instruction)"
- msgstr "语法错误(需要字符‘%c’,却到达指令尾)"
- #: epiphany-asm.c:728 fr30-asm.c:583 frv-asm.c:1536 ip2k-asm.c:784
- #: iq2000-asm.c:732 lm32-asm.c:622 m32c-asm.c:1857 m32r-asm.c:601
- #: mep-asm.c:1560 mt-asm.c:868 or1k-asm.c:776 xc16x-asm.c:649
- #: xstormy16-asm.c:549
- msgid "junk at end of line"
- msgstr "行尾有垃圾字符"
- #: epiphany-asm.c:840 fr30-asm.c:695 frv-asm.c:1648 ip2k-asm.c:896
- #: iq2000-asm.c:844 lm32-asm.c:734 m32c-asm.c:1969 m32r-asm.c:713
- #: mep-asm.c:1672 mt-asm.c:980 or1k-asm.c:888 xc16x-asm.c:761
- #: xstormy16-asm.c:661
- msgid "unrecognized form of instruction"
- msgstr "无法识别的指令格式"
- #: epiphany-asm.c:854 fr30-asm.c:709 frv-asm.c:1662 ip2k-asm.c:910
- #: iq2000-asm.c:858 lm32-asm.c:748 m32c-asm.c:1983 m32r-asm.c:727
- #: mep-asm.c:1686 mt-asm.c:994 or1k-asm.c:902 xc16x-asm.c:775
- #: xstormy16-asm.c:675
- #, c-format
- msgid "bad instruction `%.50s...'"
- msgstr "错误的指令‘%.50s...’"
- #: epiphany-asm.c:857 fr30-asm.c:712 frv-asm.c:1665 ip2k-asm.c:913
- #: iq2000-asm.c:861 lm32-asm.c:751 m32c-asm.c:1986 m32r-asm.c:730
- #: mep-asm.c:1689 mt-asm.c:997 or1k-asm.c:905 xc16x-asm.c:778
- #: xstormy16-asm.c:678
- #, c-format
- msgid "bad instruction `%.50s'"
- msgstr "错误的指令‘%.50s’"
- #. Default text to print if an instruction isn't recognized.
- #: epiphany-dis.c:41 fr30-dis.c:41 frv-dis.c:41 ip2k-dis.c:41 iq2000-dis.c:41
- #: lm32-dis.c:41 m32c-dis.c:41 m32r-dis.c:41 mep-dis.c:41 mmix-dis.c:276
- #: mt-dis.c:41 nds32-dis.c:39 or1k-dis.c:41 xc16x-dis.c:41 xstormy16-dis.c:41
- msgid "*unknown*"
- msgstr "*未知*"
- #: epiphany-dis.c:278 fr30-dis.c:299 frv-dis.c:396 ip2k-dis.c:288
- #: iq2000-dis.c:189 lm32-dis.c:147 m32c-dis.c:891 m32r-dis.c:279
- #: mep-dis.c:1187 mt-dis.c:290 or1k-dis.c:141 xc16x-dis.c:420
- #: xstormy16-dis.c:168
- #, c-format
- msgid "Unrecognized field %d while printing insn.\n"
- msgstr "打印 insn 时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:164 fr30-ibld.c:164 frv-ibld.c:164 ip2k-ibld.c:164
- #: iq2000-ibld.c:164 lm32-ibld.c:164 m32c-ibld.c:164 m32r-ibld.c:164
- #: mep-ibld.c:164 mt-ibld.c:164 or1k-ibld.c:164 xc16x-ibld.c:164
- #: xstormy16-ibld.c:164
- #, c-format
- msgid "operand out of range (%ld not between %ld and %lu)"
- msgstr "操作数越界 (%ld 不在 %ld 和 %lu 之间)"
- #: epiphany-ibld.c:185 fr30-ibld.c:185 frv-ibld.c:185 ip2k-ibld.c:185
- #: iq2000-ibld.c:185 lm32-ibld.c:185 m32c-ibld.c:185 m32r-ibld.c:185
- #: mep-ibld.c:185 mt-ibld.c:185 or1k-ibld.c:185 xc16x-ibld.c:185
- #: xstormy16-ibld.c:185
- #, fuzzy, c-format
- #| msgid "operand out of range (%lu not between 0 and %lu)"
- msgid "operand out of range (0x%lx not between 0 and 0x%lx)"
- msgstr "操作数超出范围 (0x %lx 请不是 0 和 0x %lx 之间)"
- #: epiphany-ibld.c:879 fr30-ibld.c:734 frv-ibld.c:860 ip2k-ibld.c:611
- #: iq2000-ibld.c:717 lm32-ibld.c:638 m32c-ibld.c:1735 m32r-ibld.c:669
- #: mep-ibld.c:1212 mt-ibld.c:753 or1k-ibld.c:650 xc16x-ibld.c:756
- #: xstormy16-ibld.c:682
- #, c-format
- msgid "Unrecognized field %d while building insn.\n"
- msgstr "建立 insn 时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:1173 fr30-ibld.c:939 frv-ibld.c:1177 ip2k-ibld.c:686
- #: iq2000-ibld.c:892 lm32-ibld.c:742 m32c-ibld.c:2896 m32r-ibld.c:806
- #: mep-ibld.c:1811 mt-ibld.c:973 or1k-ibld.c:755 xc16x-ibld.c:976
- #: xstormy16-ibld.c:828
- #, c-format
- msgid "Unrecognized field %d while decoding insn.\n"
- msgstr "解码 insn 时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:1316 fr30-ibld.c:1085 frv-ibld.c:1455 ip2k-ibld.c:760
- #: iq2000-ibld.c:1023 lm32-ibld.c:831 m32c-ibld.c:3513 m32r-ibld.c:919
- #: mep-ibld.c:2281 mt-ibld.c:1173 or1k-ibld.c:838 xc16x-ibld.c:1197
- #: xstormy16-ibld.c:938
- #, c-format
- msgid "Unrecognized field %d while getting int operand.\n"
- msgstr "获得 int 操作数时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:1441 fr30-ibld.c:1213 frv-ibld.c:1715 ip2k-ibld.c:816
- #: iq2000-ibld.c:1136 lm32-ibld.c:902 m32c-ibld.c:4112 m32r-ibld.c:1014
- #: mep-ibld.c:2733 mt-ibld.c:1355 or1k-ibld.c:903 xc16x-ibld.c:1400
- #: xstormy16-ibld.c:1030
- #, c-format
- msgid "Unrecognized field %d while getting vma operand.\n"
- msgstr "获得 vma 操作数时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:1573 fr30-ibld.c:1344 frv-ibld.c:1982 ip2k-ibld.c:875
- #: iq2000-ibld.c:1256 lm32-ibld.c:980 m32c-ibld.c:4699 m32r-ibld.c:1115
- #: mep-ibld.c:3146 mt-ibld.c:1544 or1k-ibld.c:975 xc16x-ibld.c:1604
- #: xstormy16-ibld.c:1129
- #, c-format
- msgid "Unrecognized field %d while setting int operand.\n"
- msgstr "设置 int 操作数时遇到无法识别的字段 %d。\n"
- #: epiphany-ibld.c:1695 fr30-ibld.c:1465 frv-ibld.c:2239 ip2k-ibld.c:924
- #: iq2000-ibld.c:1366 lm32-ibld.c:1048 m32c-ibld.c:5276 m32r-ibld.c:1206
- #: mep-ibld.c:3549 mt-ibld.c:1723 or1k-ibld.c:1037 xc16x-ibld.c:1798
- #: xstormy16-ibld.c:1218
- #, c-format
- msgid "Unrecognized field %d while setting vma operand.\n"
- msgstr "设置 vma 操作数时遇到无法识别的字段 %d。\n"
- #: fr30-asm.c:93 m32c-asm.c:872 m32c-asm.c:879
- msgid "Register number is not valid"
- msgstr "寄存器数字无效"
- #: fr30-asm.c:95
- msgid "Register must be between r0 and r7"
- msgstr "寄存器必须 r0 和 r7 之间"
- #: fr30-asm.c:97
- msgid "Register must be between r8 and r15"
- msgstr "寄存器必须 r8 和 r15 之间"
- #: fr30-asm.c:116 m32c-asm.c:910
- msgid "Register list is not valid"
- msgstr "寄存器列表无效"
- #: frv-asm.c:608
- msgid "missing `]'"
- msgstr "缺少 `]'"
- #: frv-asm.c:611 frv-asm.c:621
- #, fuzzy
- #| msgid "immediate value is out of range"
- msgid "Special purpose register number is out of range"
- msgstr "专用寄存器的编号是超出范围"
- #: frv-asm.c:908
- #, fuzzy
- msgid "Value of A operand must be 0 or 1"
- msgstr "数字必须是 0 或 1"
- #: frv-asm.c:944
- msgid "register number must be even"
- msgstr "寄存器数必须是偶数"
- #: h8300-dis.c:313
- #, c-format
- msgid "Hmmmm 0x%x"
- msgstr "咦... 0x%x"
- #: h8300-dis.c:690
- #, c-format
- msgid "Don't understand 0x%x \n"
- msgstr "无法识别 0x%x \n"
- #: h8500-dis.c:123
- #, fuzzy, c-format
- msgid "can't cope with insert %d\n"
- msgstr "无法清除未激活的密钥 %d。\n"
- #. Couldn't understand anything.
- #: h8500-dis.c:323
- #, c-format
- msgid "%02x\t\t*unknown*"
- msgstr "%02x\t\t*未知*"
- #: i386-dis.c:12330
- msgid "<internal disassembler error>"
- msgstr "<反汇编器内部错误>"
- #: i386-dis.c:12625
- #, c-format
- msgid ""
- "\n"
- "The following i386/x86-64 specific disassembler options are supported for use\n"
- "with the -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "下列 i386/x86-64 特定的反汇编器选项在使用 -M 开关时可用(使用逗号分隔多个选项):\n"
- #: i386-dis.c:12629
- #, c-format
- msgid " x86-64 Disassemble in 64bit mode\n"
- msgstr " x86-64 在 64 位模式下反汇编\n"
- #: i386-dis.c:12630
- #, c-format
- msgid " i386 Disassemble in 32bit mode\n"
- msgstr " i386 在 32 位模式下反汇编\n"
- #: i386-dis.c:12631
- #, c-format
- msgid " i8086 Disassemble in 16bit mode\n"
- msgstr " i8086 在 16 位模式下反汇编\n"
- #: i386-dis.c:12632
- #, c-format
- msgid " att Display instruction in AT&T syntax\n"
- msgstr " att 用 AT&T 语法显示指令\n"
- #: i386-dis.c:12633
- #, c-format
- msgid " intel Display instruction in Intel syntax\n"
- msgstr " intel 用 Intel 语法显示指令\n"
- #: i386-dis.c:12634
- #, fuzzy, c-format
- msgid ""
- " att-mnemonic\n"
- " Display instruction in AT&T mnemonic\n"
- msgstr " att 用 AT&T 语法显示指令\n"
- #: i386-dis.c:12636
- #, fuzzy, c-format
- msgid ""
- " intel-mnemonic\n"
- " Display instruction in Intel mnemonic\n"
- msgstr " intel 用 Intel 语法显示指令\n"
- #: i386-dis.c:12638
- #, c-format
- msgid " addr64 Assume 64bit address size\n"
- msgstr " addr64 假定 64 位地址大小\n"
- #: i386-dis.c:12639
- #, c-format
- msgid " addr32 Assume 32bit address size\n"
- msgstr " addr32 假定 32 位地址大小\n"
- #: i386-dis.c:12640
- #, c-format
- msgid " addr16 Assume 16bit address size\n"
- msgstr " addr16 假定 16 位地址大小\n"
- #: i386-dis.c:12641
- #, c-format
- msgid " data32 Assume 32bit data size\n"
- msgstr " data32 假定 32 位数据大小\n"
- #: i386-dis.c:12642
- #, c-format
- msgid " data16 Assume 16bit data size\n"
- msgstr " data16 假定 16 位数据大小\n"
- #: i386-dis.c:12643
- #, c-format
- msgid " suffix Always display instruction suffix in AT&T syntax\n"
- msgstr " suffix 在 AT&T 语法中始终显示指令后缀\n"
- #: i386-dis.c:12644
- #, fuzzy, c-format
- #| msgid " att Display instruction in AT&T syntax\n"
- msgid " amd64 Display instruction in AMD64 ISA\n"
- msgstr " att 用 AT&T 语法显示指令\n"
- #: i386-dis.c:12645
- #, fuzzy, c-format
- #| msgid " intel Display instruction in Intel syntax\n"
- msgid " intel64 Display instruction in Intel64 ISA\n"
- msgstr " intel 用 Intel 语法显示指令\n"
- #: i386-dis.c:13190
- msgid "64-bit address is disabled"
- msgstr "64 位地址已禁用"
- #: i386-gen.c:711 ia64-gen.c:306
- #, c-format
- msgid "%s: Error: "
- msgstr "%s:错误:"
- #: i386-gen.c:890
- #, fuzzy, c-format
- msgid "%s: %d: Unknown bitfield: %s\n"
- msgstr "行 %d:未知标签:%s\n"
- #: i386-gen.c:892
- #, fuzzy, c-format
- #| msgid "Unknown error %d\n"
- msgid "Unknown bitfield: %s\n"
- msgstr "%s:未知函数‘%u’\n"
- #: i386-gen.c:955
- #, fuzzy, c-format
- msgid "%s: %d: Missing `)' in bitfield: %s\n"
- msgstr "缺少 %s%d %s:%s\n"
- #: i386-gen.c:1256
- #, fuzzy, c-format
- msgid "can't find i386-opc.tbl for reading, errno = %s\n"
- msgstr "找不到阅读,errno i386 opc.tbl = %s"
- #: i386-gen.c:1387
- #, fuzzy, c-format
- msgid "can't find i386-reg.tbl for reading, errno = %s\n"
- msgstr "找不到阅读,errno i386 reg.tbl = %s"
- #: i386-gen.c:1465
- #, fuzzy, c-format
- msgid "can't create i386-init.h, errno = %s\n"
- msgstr "无法创建 i386-init.h,errno = %s"
- #: i386-gen.c:1555 ia64-gen.c:2829
- #, c-format
- msgid "unable to change directory to \"%s\", errno = %s\n"
- msgstr "无法将当前目录切换至“%s”,errno = %s\n"
- #: i386-gen.c:1567 i386-gen.c:1570
- #, c-format
- msgid "CpuMax != %d!\n"
- msgstr ""
- #: i386-gen.c:1574
- #, c-format
- msgid "%d unused bits in i386_cpu_flags.\n"
- msgstr ""
- #: i386-gen.c:1581
- #, fuzzy, c-format
- msgid "%d unused bits in i386_operand_type.\n"
- msgstr "%d 未使用的钻头在 i386_operand_type。"
- #: i386-gen.c:1595
- #, c-format
- msgid "can't create i386-tbl.h, errno = %s\n"
- msgstr "无法创建 i386-tbl.h,errno = %s\n"
- #: ia64-gen.c:319
- #, c-format
- msgid "%s: Warning: "
- msgstr "%s:警告:"
- #: ia64-gen.c:505 ia64-gen.c:736
- #, fuzzy, c-format
- msgid "multiple note %s not handled\n"
- msgstr "%s:多次重复定义符号“%s”"
- #: ia64-gen.c:616
- #, fuzzy
- msgid "can't find ia64-ic.tbl for reading\n"
- msgstr "找不到 ia64 ic.tbl 阅读"
- #: ia64-gen.c:818
- #, fuzzy, c-format
- msgid "can't find %s for reading\n"
- msgstr "%s:无法找到模块文件 %s\n"
- #: ia64-gen.c:1050
- #, fuzzy, c-format
- msgid ""
- "most recent format '%s'\n"
- "appears more restrictive than '%s'\n"
- msgstr "最新格式 %s 似乎比 %s 的限制性更强"
- #: ia64-gen.c:1061
- #, fuzzy, c-format
- msgid "overlapping field %s->%s\n"
- msgstr "缺少字段‘%s’,在‘%s’中"
- #: ia64-gen.c:1258
- #, fuzzy, c-format
- msgid "overwriting note %d with note %d (IC:%s)\n"
- msgstr "用注 %d (IC:%s) 覆盖注 %d"
- #: ia64-gen.c:1465
- #, c-format
- msgid "don't know how to specify %% dependency %s\n"
- msgstr "不知道如何指定 %% 依赖 %s\n"
- #: ia64-gen.c:1487
- #, c-format
- msgid "Don't know how to specify # dependency %s\n"
- msgstr "不知道如何指定 # 依赖 %s\n"
- #: ia64-gen.c:1526
- #, fuzzy, c-format
- msgid "IC:%s [%s] has no terminals or sub-classes\n"
- msgstr "IC:%s [%s] 没有任何终端或子类"
- #: ia64-gen.c:1529
- #, fuzzy, c-format
- msgid "IC:%s has no terminals or sub-classes\n"
- msgstr "IC:%s 有没有终端或子类"
- #: ia64-gen.c:1538
- #, fuzzy, c-format
- msgid "no insns mapped directly to terminal IC %s [%s]"
- msgstr "没有 insn 被直接映射到终端 IC %s [%s]"
- #: ia64-gen.c:1541
- #, fuzzy, c-format
- msgid "no insns mapped directly to terminal IC %s\n"
- msgstr "没有 insn 被直接映射到终端 IC %s\n"
- #: ia64-gen.c:1552
- #, fuzzy, c-format
- msgid "class %s is defined but not used\n"
- msgstr "%q+D定义后未使用"
- #: ia64-gen.c:1565
- #, fuzzy, c-format
- msgid "Warning: rsrc %s (%s) has no chks\n"
- msgstr "警告:%s 节的大小为零"
- #: ia64-gen.c:1568
- #, fuzzy, c-format
- msgid "Warning: rsrc %s (%s) has no chks or regs\n"
- msgstr "指数部分没有数字"
- #: ia64-gen.c:1572
- #, fuzzy, c-format
- msgid "rsrc %s (%s) has no regs\n"
- msgstr "%s 已不可访问"
- #: ia64-gen.c:2464
- #, c-format
- msgid "IC note %d in opcode %s (IC:%s) conflicts with resource %s note %d\n"
- msgstr ""
- #: ia64-gen.c:2492
- #, c-format
- msgid "IC note %d for opcode %s (IC:%s) conflicts with resource %s note %d\n"
- msgstr ""
- #: ia64-gen.c:2506
- #, fuzzy, c-format
- msgid "opcode %s has no class (ops %d %d %d)\n"
- msgstr "尚未定义名为“%s”的 <draw_ops>"
- #. We've been passed a w. Return with an error message so that
- #. cgen will try the next parsing option.
- #: ip2k-asm.c:81
- msgid "W keyword invalid in FR operand slot."
- msgstr "W 关键字非法,在 FR 操作数槽位中。"
- #. Invalid offset present.
- #: ip2k-asm.c:106
- msgid "offset(IP) is not a valid form"
- msgstr "偏移量(IP)不是合法格式"
- #. Found something there in front of (DP) but it's out
- #. of range.
- #: ip2k-asm.c:154
- msgid "(DP) offset out of range."
- msgstr "(DP) 偏移量越界"
- #. Found something there in front of (SP) but it's out
- #. of range.
- #: ip2k-asm.c:195
- msgid "(SP) offset out of range."
- msgstr "(SP) 偏移量越界。"
- #: ip2k-asm.c:211
- msgid "illegal use of parentheses"
- msgstr "括号用法非法"
- #: ip2k-asm.c:218
- #, fuzzy
- msgid "operand out of range (not between 1 and 255)"
- msgstr "操作数越界(%ld 不在 %ld 和 %ld 之间)"
- #. Something is very wrong. opindex has to be one of the above.
- #: ip2k-asm.c:242
- #, fuzzy
- msgid "parse_addr16: invalid opindex."
- msgstr "无效的‘asm’:"
- #: ip2k-asm.c:296
- msgid "Byte address required. - must be even."
- msgstr ""
- #: ip2k-asm.c:305
- msgid "cgen_parse_address returned a symbol. Literal required."
- msgstr ""
- #: ip2k-asm.c:360
- #, fuzzy
- msgid "percent-operator operand is not a symbol"
- msgstr "%%L处的 .not. 运算符的操作数为 %s"
- #: ip2k-asm.c:413
- msgid "Attempt to find bit index of 0"
- msgstr ""
- #: iq2000-asm.c:112 iq2000-asm.c:142
- msgid "immediate value cannot be register"
- msgstr "立即数不能是寄存器"
- #: iq2000-asm.c:123 iq2000-asm.c:153 lm32-asm.c:70
- msgid "immediate value out of range"
- msgstr "立即数越界"
- #: iq2000-asm.c:182
- msgid "21-bit offset out of range"
- msgstr "21位长的偏移量越界"
- #: lm32-asm.c:166
- #, fuzzy
- msgid "expecting gp relative address: gp(symbol)"
- msgstr "不能使用非 GP 相对的绝对地址"
- #: lm32-asm.c:196
- msgid "expecting got relative address: got(symbol)"
- msgstr ""
- #: lm32-asm.c:226
- msgid "expecting got relative address: gotoffhi16(symbol)"
- msgstr ""
- #: lm32-asm.c:256
- msgid "expecting got relative address: gotofflo16(symbol)"
- msgstr ""
- #: m10200-dis.c:157 m10300-dis.c:580
- #, c-format
- msgid "unknown\t0x%04lx"
- msgstr "未知\t0x%04lx"
- #: m10200-dis.c:327
- #, c-format
- msgid "unknown\t0x%02lx"
- msgstr "未知\t0x%02lx"
- #: m32c-asm.c:117
- msgid "imm:6 immediate is out of range"
- msgstr "imm:6 立即数越界"
- #: m32c-asm.c:145
- #, c-format
- msgid "%dsp8() takes a symbolic address, not a number"
- msgstr "%dsp8() 使用一个符号地址,而非数字"
- #: m32c-asm.c:159 m32c-asm.c:163 m32c-asm.c:253
- msgid "dsp:8 immediate is out of range"
- msgstr "dsp:8 立即数越界"
- #: m32c-asm.c:184 m32c-asm.c:188
- msgid "Immediate is out of range -8 to 7"
- msgstr "立即数越界 (-8 到 7)"
- #: m32c-asm.c:209 m32c-asm.c:213
- msgid "Immediate is out of range -7 to 8"
- msgstr "立即数越界 (-7 到 8)"
- #: m32c-asm.c:281
- #, c-format
- msgid "%dsp16() takes a symbolic address, not a number"
- msgstr "%dsp16() 使用一个符号地址,而非数字"
- #: m32c-asm.c:305 m32c-asm.c:312 m32c-asm.c:373
- msgid "dsp:16 immediate is out of range"
- msgstr "dsp:16 立即数越界"
- #: m32c-asm.c:399
- msgid "dsp:20 immediate is out of range"
- msgstr "dsp:20 立即数越界"
- #: m32c-asm.c:425 m32c-asm.c:445
- msgid "dsp:24 immediate is out of range"
- msgstr "dsp:24 立即数越界"
- #: m32c-asm.c:478
- msgid "immediate is out of range 1-2"
- msgstr "立即数越界 1-2"
- #: m32c-asm.c:496
- msgid "immediate is out of range 1-8"
- msgstr "立即数越界 1-8"
- #: m32c-asm.c:514
- msgid "immediate is out of range 0-7"
- msgstr "立即数越界 0-7"
- #: m32c-asm.c:550
- msgid "immediate is out of range 2-9"
- msgstr "立即数越界 2-9"
- #: m32c-asm.c:568
- msgid "Bit number for indexing general register is out of range 0-15"
- msgstr ""
- #: m32c-asm.c:606 m32c-asm.c:662
- #, fuzzy
- #| msgid "immediate value is out of range"
- msgid "bit,base is out of range"
- msgstr "立即数越界"
- #: m32c-asm.c:613 m32c-asm.c:618 m32c-asm.c:666
- #, fuzzy
- #| msgid "21-bit offset out of range"
- msgid "bit,base out of range for symbol"
- msgstr "21位长的偏移量越界"
- #: m32c-asm.c:802
- #, fuzzy
- msgid "not a valid r0l/r0h pair"
- msgstr "有效的参数为:\n"
- #: m32c-asm.c:832
- #, fuzzy
- #| msgid "invalid mask field"
- msgid "Invalid size specifier"
- msgstr "%s:无效的新列指定符号“%s”\n"
- #: m68k-dis.c:1292
- #, c-format
- msgid "<function code %d>"
- msgstr "<函数代码 %d>"
- #: m68k-dis.c:1455
- #, c-format
- msgid "<internal error in opcode table: %s %s>\n"
- msgstr "<操作数表中出现内部错误:%s %s>\n"
- #: m88k-dis.c:678
- #, c-format
- msgid "# <dis error: %08lx>"
- msgstr "# <反汇编出错: %08lx>"
- #: mep-asm.c:129
- msgid "Only $tp or $13 allowed for this opcode"
- msgstr ""
- #: mep-asm.c:143
- msgid "Only $sp or $15 allowed for this opcode"
- msgstr ""
- #: mep-asm.c:308 mep-asm.c:504
- #, fuzzy, c-format
- msgid "invalid %function() here"
- msgstr "%qE未声明(不在函数内)"
- #: mep-asm.c:336
- msgid "Immediate is out of range -32768 to 32767"
- msgstr "立即数越界 (-32768 到 32767)"
- #: mep-asm.c:356
- msgid "Immediate is out of range 0 to 65535"
- msgstr "立即数越界 (0 到 65535)"
- #: mep-asm.c:549 mep-asm.c:562
- msgid "Immediate is out of range -512 to 511"
- msgstr "立即数越界 (-512 到 511)"
- #: mep-asm.c:554 mep-asm.c:563
- msgid "Immediate is out of range -128 to 127"
- msgstr "立即数越界 (-128 到 127)"
- #: mep-asm.c:558
- msgid "Value is not aligned enough"
- msgstr "数值对齐程度不够"
- #: mips-dis.c:1751 mips-dis.c:1977
- #, fuzzy, c-format
- #| msgid "# internal error, undefined modifier(%c)"
- msgid "# internal error, undefined operand in `%s %s'"
- msgstr "<操作数表中出现内部错误:%s %s>\n"
- #: mips-dis.c:2553
- #, c-format
- msgid ""
- "\n"
- "The following MIPS specific disassembler options are supported for use\n"
- "with the -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "下列 MIPS 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
- #: mips-dis.c:2557
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " aliases Do print instruction aliases.\n"
- msgid ""
- "\n"
- " no-aliases Use canonical instruction forms.\n"
- msgstr ""
- "\n"
- " aliases 要打印指令别名。\n"
- #: mips-dis.c:2560
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " msa Recognize MSA instructions.\n"
- msgid ""
- "\n"
- " msa Recognize MSA instructions.\n"
- msgstr ""
- "\n"
- " msa 识别 MSA 指令。\n"
- #: mips-dis.c:2563
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " virt Recognize the virtualization ASE instructions.\n"
- msgid ""
- "\n"
- " virt Recognize the virtualization ASE instructions.\n"
- msgstr ""
- "\n"
- " virt 识别虚拟化 ASE 指令。\n"
- #: mips-dis.c:2566
- #, c-format
- msgid ""
- "\n"
- " xpa Recognize the eXtended Physical Address (XPA)\n"
- " ASE instructions.\n"
- msgstr ""
- #: mips-dis.c:2570
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " gpr-names=ABI Print GPR names according to specified ABI.\n"
- #| " Default: based on binary being disassembled.\n"
- msgid ""
- "\n"
- " gpr-names=ABI Print GPR names according to specified ABI.\n"
- " Default: based on binary being disassembled.\n"
- msgstr ""
- "\n"
- " gpr-names=ABI 根据指定的 ABI 打印通用寄存器名。\n"
- " 默认:根据被反汇编的二进制文件。\n"
- #: mips-dis.c:2574
- #, c-format
- msgid ""
- "\n"
- " fpr-names=ABI Print FPR names according to specified ABI.\n"
- " Default: numeric.\n"
- msgstr ""
- "\n"
- " fpr-names=ABI 根据指定的 ABI 打印浮点寄存器名。\n"
- " 默认:数字。\n"
- #: mips-dis.c:2578
- #, c-format
- msgid ""
- "\n"
- " cp0-names=ARCH Print CP0 register names according to\n"
- " specified architecture.\n"
- " Default: based on binary being disassembled.\n"
- msgstr ""
- "\n"
- " cp0-names=ARCH 根据指定的架构打印 CP0 寄存器名。\n"
- " 默认:根据被反汇编的二进制代码。\n"
- #: mips-dis.c:2583
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| " hwr-names=ARCH Print HWR names according to specified \n"
- #| "\t\t\t architecture.\n"
- #| " Default: based on binary being disassembled.\n"
- msgid ""
- "\n"
- " hwr-names=ARCH Print HWR names according to specified \n"
- " architecture.\n"
- " Default: based on binary being disassembled.\n"
- msgstr ""
- "\n"
- " hwr-names=ARCH 根据指定的架构打印 HWR 寄存器名。\n"
- " 默认:根据被反汇编的二进制代码。\n"
- #: mips-dis.c:2588
- #, c-format
- msgid ""
- "\n"
- " reg-names=ABI Print GPR and FPR names according to\n"
- " specified ABI.\n"
- msgstr ""
- "\n"
- " reg-names=ABI 根据指定的 ABI 打印通用寄存器和浮点寄存\n"
- " 器名。\n"
- #: mips-dis.c:2592
- #, c-format
- msgid ""
- "\n"
- " reg-names=ARCH Print CP0 register and HWR names according to\n"
- " specified architecture.\n"
- msgstr ""
- "\n"
- " reg-names=ARCH 根据指定的架构打印 CP0 和 HWR 寄存器名。\n"
- #: mips-dis.c:2596
- #, c-format
- msgid ""
- "\n"
- " For the options above, the following values are supported for \"ABI\":\n"
- " "
- msgstr ""
- "\n"
- " 对于以上的选项,以下值可被用于 \"ABI\":\n"
- " "
- #: mips-dis.c:2603
- #, c-format
- msgid ""
- "\n"
- " For the options above, The following values are supported for \"ARCH\":\n"
- " "
- msgstr ""
- "\n"
- " 对于以上的选项,以下值可被用于 \"ARCH\":\n"
- " "
- #: mmix-dis.c:34
- #, fuzzy, c-format
- msgid "Bad case %d (%s) in %s:%d\n"
- msgstr "行 %d: 不当的 no%s 数字:%d\n"
- #: mmix-dis.c:44
- #, c-format
- msgid "Internal: Non-debugged code (test-case missing): %s:%d"
- msgstr ""
- #: mmix-dis.c:53
- msgid "(unknown)"
- msgstr "(未知)"
- #: mmix-dis.c:511
- #, fuzzy, c-format
- msgid "*unknown operands type: %d*"
- msgstr "%s:未知的重定位类型 %d"
- #: msp430-dis.c:59
- #, c-format
- msgid "Warning: disassembly unreliable - not enough bytes available"
- msgstr "警告:反汇编不可靠 - 没有足够的可用字节"
- #: msp430-dis.c:65
- #, c-format
- msgid "Error: read from memory failed"
- msgstr "错误:从内存读取失败"
- #: msp430-dis.c:499
- #, fuzzy
- msgid "Warning: illegal as emulation instr"
- msgstr "不要使用 fabss 自定义指令"
- #. R2/R3 are illegal as dest: may be data section.
- #: msp430-dis.c:591
- #, fuzzy
- msgid "Warning: illegal as 2-op instr"
- msgstr "不要使用 fabss 自定义指令"
- #: msp430-dis.c:1002
- #, fuzzy
- msgid "Warning: unrecognised CALLA addressing mode"
- msgstr "无效寻址模式"
- #: msp430-dis.c:1303 msp430-dis.c:1324 msp430-dis.c:1345
- #, c-format
- msgid "Warning: reserved use of A/L and B/W bits detected"
- msgstr ""
- #: mt-asm.c:110 mt-asm.c:190
- #, fuzzy
- msgid "Operand out of range. Must be between -32768 and 32767."
- msgstr "操作数越界(%lu 不在 0 和 %lu 之间)"
- #: mt-asm.c:149
- msgid "Biiiig Trouble in parse_imm16!"
- msgstr ""
- #: mt-asm.c:157
- #, fuzzy
- msgid "The percent-operator's operand is not a symbol"
- msgstr "%%L处的 .not. 运算符的操作数为 %s"
- #: mt-asm.c:395
- msgid "invalid operand. type may have values 0,1,2 only."
- msgstr ""
- #. I and Z are output operands and can`t be immediate
- #. A is an address and we can`t have the address of
- #. an immediate either. We don't know how much to increase
- #. aoffsetp by since whatever generated this is broken
- #. anyway!
- #: ns32k-dis.c:533
- #, c-format
- msgid "$<undefined>"
- msgstr "$<未定义>"
- #: ppc-dis.c:359
- #, fuzzy, c-format
- msgid "warning: ignoring unknown -M%s option\n"
- msgstr "警告:忽略--strip-program 选项,因为-s 选项没有指明"
- #: ppc-dis.c:880
- #, c-format
- msgid ""
- "\n"
- "The following PPC specific disassembler options are supported for use with\n"
- "the -M switch:\n"
- msgstr ""
- "\n"
- "下列 PPC 特定的反汇编器选项在使用 -M 开关时可用(使用逗号分隔多个选项):\n"
- #: ppc-opc.c:52 ppc-opc.c:75 ppc-opc.c:100 ppc-opc.c:129
- msgid "invalid register"
- msgstr "无效的寄存器"
- #: ppc-opc.c:377 ppc-opc.c:405
- msgid "invalid conditional option"
- msgstr "无效的条件选项"
- #: ppc-opc.c:379 ppc-opc.c:407
- #, fuzzy
- msgid "invalid counter access"
- msgstr "没有访问权限"
- #: ppc-opc.c:409
- msgid "attempt to set y bit when using + or - modifier"
- msgstr ""
- #: ppc-opc.c:500
- msgid "invalid mask field"
- msgstr "无效的掩码字段"
- #: ppc-opc.c:523
- #, fuzzy
- msgid "invalid mfcr mask"
- msgstr "无效的掩码字段"
- #: ppc-opc.c:596 ppc-opc.c:636
- #, fuzzy
- msgid "illegal L operand value"
- msgstr "立即数"
- #: ppc-opc.c:642
- msgid "incompatible L operand value"
- msgstr ""
- #: ppc-opc.c:686 ppc-opc.c:721
- msgid "illegal bitmask"
- msgstr "非法的位掩码"
- #: ppc-opc.c:808
- #, fuzzy
- msgid "address register in load range"
- msgstr "地址中无寄存器"
- #: ppc-opc.c:874
- #, fuzzy
- msgid "index register in load range"
- msgstr "寄存器元素下标"
- #: ppc-opc.c:903 ppc-opc.c:984
- msgid "source and target register operands must be different"
- msgstr ""
- #: ppc-opc.c:931
- msgid "invalid register operand when updating"
- msgstr ""
- #: ppc-opc.c:1047
- msgid "illegal immediate value"
- msgstr "非法的立即数"
- #: ppc-opc.c:1194
- #, fuzzy
- msgid "invalid sprg number"
- msgstr "无效的数字。"
- #: ppc-opc.c:1231
- #, fuzzy
- msgid "invalid tbr number"
- msgstr "无效的数字。"
- #: ppc-opc.c:1373
- #, fuzzy
- #| msgid "invalid conditional option"
- msgid "invalid constant"
- msgstr "%<#pragma pack%>中有无效常量 - 已忽略"
- #: ppc-opc.c:1478 ppc-opc.c:1505 ppc-opc.c:1532 ppc-opc.c:1559
- msgid "UIMM = 00000 is illegal"
- msgstr ""
- #: ppc-opc.c:1586
- msgid "UIMM values >7 are illegal"
- msgstr ""
- #: ppc-opc.c:1613
- msgid "UIMM values >15 are illegal"
- msgstr ""
- #: ppc-opc.c:1640
- msgid "GPR odd is illegal"
- msgstr ""
- #: ppc-opc.c:1667 ppc-opc.c:1694
- #, fuzzy
- #| msgid "invalid register offset"
- msgid "invalid offset"
- msgstr "无效的寄存器偏移量"
- #: ppc-opc.c:1721
- #, fuzzy
- msgid "invalid Ddd value"
- msgstr "无效的数字。"
- #. Invalid option.
- #: riscv-dis.c:68
- #, fuzzy, c-format
- #| msgid "Unrecognised disassembler option: %s\n"
- msgid "Unrecognized disassembler option: %s\n"
- msgstr "无法识别的反汇编器选项:%s\n"
- #: riscv-dis.c:346
- #, fuzzy, c-format
- #| msgid "# internal error, undefined modifier(%c)"
- msgid "# internal error, undefined modifier (%c)"
- msgstr "<操作数表中出现内部错误:%s %s>\n"
- #: riscv-dis.c:498
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| "The following MIPS specific disassembler options are supported for use\n"
- #| "with the -M switch (multiple options should be separated by commas):\n"
- msgid ""
- "\n"
- "The following RISC-V-specific disassembler options are supported for use\n"
- "with the -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "下列 MIPS 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
- #: riscv-dis.c:502
- #, c-format
- msgid ""
- "\n"
- " numeric Print numeric register names, rather than ABI names.\n"
- msgstr ""
- #: riscv-dis.c:505
- #, c-format
- msgid ""
- "\n"
- " no-aliases Disassemble only into canonical instructions, rather\n"
- " than into pseudoinstructions.\n"
- msgstr ""
- #: s390-dis.c:42
- #, fuzzy
- #| msgid " esa Disassemble in ESA architecture mode\n"
- msgid "Disassemble in ESA architecture mode"
- msgstr " esa 在 ESA 架构模式下反汇编\n"
- #: s390-dis.c:43
- #, fuzzy
- msgid "Disassemble in z/Architecture mode"
- msgstr "z/Architecture 模式在 %s 上不受支持"
- #: s390-dis.c:44
- msgid "Print unknown instructions according to length from first two bits"
- msgstr ""
- #: s390-dis.c:409
- #, c-format
- msgid ""
- "\n"
- "The following S/390 specific disassembler options are supported for use\n"
- "with the -M switch (multiple options should be separated by commas):\n"
- msgstr ""
- "\n"
- "\n"
- "下列 S/390 特定的反汇编器选项可通过 -M 开关启用(使用逗号分隔多个选项):\n"
- #: score-dis.c:663 score-dis.c:870 score-dis.c:1031 score-dis.c:1145
- #: score-dis.c:1152 score-dis.c:1159 score7-dis.c:695 score7-dis.c:858
- #, fuzzy
- #| msgid "<illegal precision>"
- msgid "<illegal instruction>"
- msgstr "非法操作"
- #: sparc-dis.c:309
- #, c-format
- msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
- msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
- #: sparc-dis.c:320
- #, c-format
- msgid "Internal error: bad sparc-opcode.h: \"%s\", %#.8lx, %#.8lx\n"
- msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
- #: sparc-dis.c:379
- #, fuzzy, c-format
- msgid "Internal error: bad sparc-opcode.h: \"%s\" == \"%s\"\n"
- msgstr "内部错误:错误的 sparc-opcode.h:“%s”,%#.8lx,%#.8lx\n"
- #. Mark as non-valid instruction.
- #: sparc-dis.c:1100
- msgid "unknown"
- msgstr "未知"
- #: v850-dis.c:453
- #, fuzzy, c-format
- msgid "unknown operand shift: %x\n"
- msgstr "<未知>:%x"
- #: v850-dis.c:465
- #, fuzzy, c-format
- #| msgid "unknown pop reg: %d\n"
- msgid "unknown reg: %d\n"
- msgstr "<未知>:%d"
- #. The functions used to insert and extract complicated operands.
- #. Note: There is a conspiracy between these functions and
- #. v850_insert_operand() in gas/config/tc-v850.c. Error messages
- #. containing the string 'out of range' will be ignored unless a
- #. specific command line option is given to GAS.
- #: v850-opc.c:53
- #, fuzzy
- msgid "displacement value is not in range and is not aligned"
- msgstr "偏移值越界"
- #: v850-opc.c:54
- msgid "displacement value is out of range"
- msgstr "偏移值越界"
- #: v850-opc.c:55
- msgid "displacement value is not aligned"
- msgstr "偏移值未对齐"
- #: v850-opc.c:57
- msgid "immediate value is out of range"
- msgstr "立即数越界"
- #: v850-opc.c:58
- msgid "branch value out of range"
- msgstr "跳转越界"
- #: v850-opc.c:59
- msgid "branch value not in range and to odd offset"
- msgstr "跳转越界且跳转偏移量为奇数"
- #: v850-opc.c:60
- msgid "branch to odd offset"
- msgstr "跳转偏移量为奇数"
- #: v850-opc.c:61
- #, fuzzy
- #| msgid "immediate value is out of range"
- msgid "position value is out of range"
- msgstr "立即数越界"
- #: v850-opc.c:62
- #, fuzzy
- #| msgid "immediate value is out of range"
- msgid "width value is out of range"
- msgstr "立即数越界"
- #: v850-opc.c:63
- #, fuzzy
- #| msgid "value out of range"
- msgid "SelID is out of range"
- msgstr "SR/SelID 越界"
- #: v850-opc.c:64
- msgid "vector8 is out of range"
- msgstr "vector8 越界"
- #: v850-opc.c:65
- msgid "vector5 is out of range"
- msgstr "vector5 越界"
- #: v850-opc.c:66
- msgid "imm10 is out of range"
- msgstr "imm10 越界"
- #: v850-opc.c:67
- msgid "SR/SelID is out of range"
- msgstr "SR/SelID 越界"
- #: v850-opc.c:512
- msgid "invalid register for stack adjustment"
- msgstr "用于调整堆栈的寄存器无效"
- #: v850-opc.c:532
- msgid "invalid register name"
- msgstr "无效寄存器名"
- #: wasm32-dis.c:88
- #, fuzzy
- #| msgid "invalid register name"
- msgid "Disassemble \"register\" names"
- msgstr "无效寄存器名"
- #: wasm32-dis.c:89
- msgid "Name well-known globals"
- msgstr ""
- #: wasm32-dis.c:503
- #, fuzzy, c-format
- #| msgid ""
- #| "\n"
- #| "The following ARM specific disassembler options are supported for use with\n"
- #| "the -M switch:\n"
- msgid ""
- "The following WebAssembly-specific disassembler options are supported for use\n"
- "with the -M switch:\n"
- msgstr ""
- "\n"
- "下列 ARM 特定的反汇编器选项可通过 -M 开关启用:\n"
- #: xc16x-asm.c:66
- msgid "Missing '#' prefix"
- msgstr "缺失 '#' 前缀"
- #: xc16x-asm.c:82
- msgid "Missing '.' prefix"
- msgstr "缺失 '.' 前缀"
- #: xc16x-asm.c:98
- msgid "Missing 'pof:' prefix"
- msgstr "缺失 'pof:' 前缀"
- #: xc16x-asm.c:114
- msgid "Missing 'pag:' prefix"
- msgstr "缺失 'pag:' 前缀"
- #: xc16x-asm.c:130
- msgid "Missing 'sof:' prefix"
- msgstr "缺失 'sof:' 前缀"
- #: xc16x-asm.c:146
- msgid "Missing 'seg:' prefix"
- msgstr "缺失 'seg:' 前缀"
- #: xstormy16-asm.c:71
- msgid "Bad register in preincrement"
- msgstr "前置自增中使用了错误的寄存器"
- #: xstormy16-asm.c:76
- msgid "Bad register in postincrement"
- msgstr "后置自增中使用了错误的寄存器"
- #: xstormy16-asm.c:78
- msgid "Bad register name"
- msgstr "错误的寄存器名"
- #: xstormy16-asm.c:82
- msgid "Label conflicts with register name"
- msgstr "标号与寄存器名冲突"
- #: xstormy16-asm.c:86
- msgid "Label conflicts with `Rx'"
- msgstr "标号与‘Rx’冲突"
- #: xstormy16-asm.c:88
- msgid "Bad immediate expression"
- msgstr "错误的立即数表达式"
- #: xstormy16-asm.c:109
- #, fuzzy
- msgid "No relocation for small immediate"
- msgstr "立即数"
- #: xstormy16-asm.c:119
- #, fuzzy
- msgid "Small operand was not an immediate number"
- msgstr "符号被用作立即操作数"
- #: xstormy16-asm.c:157
- msgid "Operand is not a symbol"
- msgstr "操作数不是一个符号"
- #: xstormy16-asm.c:165
- msgid "Syntax error: No trailing ')'"
- msgstr "语法错误:没有结尾的‘)’"
- #, fuzzy
- #~ msgid "Illegal limm reference in last instruction!\n"
- #~ msgstr "在最后一条指令的非法住参考!"
- #, fuzzy
- #~ msgid "unable to fit different valued constants into instruction"
- #~ msgstr "无法融入教学的不同值的常数"
- #, fuzzy
- #~ msgid "auxiliary register not allowed here"
- #~ msgstr "在这里不允许使用%<#pragma%>"
- #, fuzzy
- #~ msgid "attempt to set readonly register"
- #~ msgstr "不能设置只读属性"
- #, fuzzy
- #~ msgid "attempt to read writeonly register"
- #~ msgstr "尝试读取 writeonly 登记册"
- #, fuzzy
- #~ msgid "too many long constants"
- #~ msgstr "实参太多"
- #, fuzzy
- #~ msgid "too many shimms in load"
- #~ msgstr "重复行过多"
- #, fuzzy
- #~ msgid "impossible store"
- #~ msgstr "STORE"
- #, fuzzy
- #~ msgid "st operand error"
- #~ msgstr ""
- #~ "\n"
- #~ "错误: ILL_ILLOPN (不合法的算符)"
- #, fuzzy
- #~ msgid "address writeback not allowed"
- #~ msgstr "意外的地址写回"
- #, fuzzy
- #~ msgid "invalid load/shimm insn"
- #~ msgstr "无效指令:"
- #, fuzzy
- #~ msgid "ld operand error"
- #~ msgstr ""
- #~ "\n"
- #~ "错误: ILL_ILLOPN (不合法的算符)"
- #, fuzzy
- #~ msgid "jump flags, but no .f seen"
- #~ msgstr " -f --as-flags <flags> 把 <flags> 传递给汇编程序。\n"
- #, fuzzy
- #~ msgid "jump flags, but no limm addr"
- #~ msgstr "跳的旗帜,但没有住地址"
- #, fuzzy
- #~ msgid "flag bits of jump address limm lost"
- #~ msgstr "标志位的跳转地址住失去了"
- #, fuzzy
- #~ msgid "attempt to set HR bits"
- #~ msgstr "<无法识别的标志位集合>"
- #, fuzzy
- #~ msgid "bad jump flags value"
- #~ msgstr "错误的ai_flags 值"
- #, fuzzy
- #~ msgid "branch address not on 4 byte boundary"
- #~ msgstr "将函数强行对齐到 4 字节边界上"
- #, fuzzy
- #~ msgid "must specify .jd or no nullify suffix"
- #~ msgstr "必须指定.jd 或无 nullify 后缀"
- #~ msgid "unknown\t0x%04x"
- #~ msgstr "未知\t0x%04x"
- #~ msgid "offset not a multiple of 2"
- #~ msgstr "偏移量不是 2 的倍数"
- #~ msgid "offset greater than 62"
- #~ msgstr "偏移量大于 62"
- #~ msgid "offset not a multiple of 4"
- #~ msgstr "偏移量不是 4 的倍数"
- #~ msgid "offset greater than 124"
- #~ msgstr "偏移量大于 124"
- #~ msgid "offset not a multiple of 8"
- #~ msgstr "偏移量不是 8 的倍数"
- #~ msgid "offset greater than 248"
- #~ msgstr "偏移量大于 248"
- #~ msgid "offset not between -2048 and 2047"
- #~ msgstr "偏移量不在 -2048 和 2047 之间"
- #~ msgid "offset not between -8192 and 8191"
- #~ msgstr "偏移量不在 -8192 和 8191 之间"
- #~ msgid "target register operand must be even"
- #~ msgstr "目的寄存器操作数必须是偶数"
- #~ msgid "source register operand must be even"
- #~ msgstr "源寄存器操作数必须是偶数"
- #~ msgid "branch value not in range and to an odd offset"
- #~ msgstr "跳转越界且跳转偏移量为奇数"
- #~ msgid "immediate value not in range and not even"
- #~ msgstr "立即数越界且不是偶数"
|